Krone America Equipment

Overview KW 4.62 and 5.52: Using four rotors and working at widths of 4.60 m (15'1") and 5.50 m (18'1"), these lightweight machines are tailored to small businesses and hill farming operations. The machines feature central border spreading and rotor tilt adjustment as base specification.Compact design: The rotary tedders KW 4.62 and KW 5.52 benefit from a low deadweight, close attachment to the tractor and standard warning panels to ensure swift and safe road travel. Features The driveline Permanently lubricated rotor gearboxes: The enclosed liquid-grease lubricated gearboxes that drive the rotors are absolutely maintenance-free. Permanent lubrication gives peace of mind and increases the machine’s longevity. The chunky boxsection chassis absorbs all shock loads on the frame. The dependable system: When it comes to preparing wilted silage and hay, KRONE is the manufacturer that offers a large and extensive range of high-quality and dependable rotary tedders. These machines not only deliver high-quality work and feature a high level of standard specification but also boast a host of innovative features including maintenance-free OctoLink finger clutches and liquid-grease lubricated gearboxes to drive the rotors. OctoLink is our extremely hardwearing clutch, which forms a frictional connection at all times and yet requires no attention at all. Some of its eight fingers are always in mesh, even when the rotors are folded through 180 degrees. The rotors 5, 6 or 7 tine arms: The KRONE KW and KWT rotary tedders are available in various work widths and dimensions. Yet the rotor diameters and the number of tine arms used on each rotor also vary to suit your special needs and requirements. Pick the KRONE machine that is tailored to your conditions – small-diameter rotors with 5 tine arms per rotor, mediumsized diameter rotors with 6 tine arms and large-diameter rotors with up to 7 arms. Uniform distribution of the material: The tine arms mesh as they rotate, spreading the material uniformly across the working width to ensure the best possible wilt for quality forage. The smaller the rotor diameter, the larger the orbital overlap. Clean forage, uniform spread: Quality requires us to start with the basics. This is how we achieve high standards. The rotors on the KRONE rotary tedders are the ideal equipment to produce quality forage for on-farm use. These rotors spin for you – in hay and silage. The two 9.5 mm (0.4") legs that form one pair of tines vary in length to provide the special KRONE combing effect for optimum treatment and cleanest forage. Five coils on each Super C steel spring tine give flexibility and strength. Special stops on the ends of the tube-section tine holders ensure no tines are lost. Adjusting to needs The hex-head bolt on a separate eccentric plate instantly locks the double tine in one of three positions to provide more or less vigorous action and achieve optimum results in all conditions. High performer in arduous conditions: Heavy-duty tine arms (38 mm x 4 mm (1.5" x 0.2") tube steel) and a special ring attachment system combine to provide dependable performance in tough and permanent operation. KRONE technology gives you true peace of mind in the most difficult conditions. The meaningful system Central border spreading control spreads the crop away from the boundary for easier harvesting The angle of throw is adjusted without tools to adapt to varying crops and yields The rotors run on large wheels with inner tubes, which give excellent guidance for cleanest sweeps and dependable operation Anti-wrap guards ensure a smooth crop flow and trouble-free work Tedding at a steep angle, turning at a shallow angle: Setting the angle from 13 to 19 degrees is an easy job, which is carried out quickly on a pin-and-hole system on the brackets that hold the wheel arms. The steep position is preferred during tedding; the shallow position is best for turning. Also, the angle setting system adapts the rotors accurately to the stubble height and yield, ensuring thorough work across the full work width. Fascinating details: Thought-through details and high operator comfort boost the efficiency of your operation. The central border spreading facility ensures you are not wasting a single stem along the boundaries. In addition, it allows you to spread uphill with the machine running at an angle to the tractor. The rotor tilt is adjusted without the need of tools for perfect adaptation to the current crop and yield. Tedding every stem, the machine provides uniform conditioning for best quality feed. The headstock Strong: The headstock rests on a separate stand, which folds down to support the machine. The driveshaft is stored in a separate holder on the headstock. The stand locks in place automatically when not in use. Dampers for an enhanced ride quality: The internal compression spring (1) prevents underrunning when working downhill and the adjustable brake (2) prevents bouncing. The large machines of a 7.80 m (25'7") plus work width have additional Eladur spring elements (3), which enhance rides on public roads and bumpy dirt roads. Hydraulic and convenient: Most three-point hitch models require only one double-acting spool. Spring-loaded hydraulic rams ensure smooth lowering on the slope. With 4 and 6 rotors Three-point mounted models with 4 and 6 rotors KW 4.62, KW 5.52, KW 6.02, KW 6.72 and KW 7.82 – working at 4.60 m to 7.80 m (15'1" to 25'7") widths with rotors in various diameters Central border spreading facility manual or hydraulic control (option) Convenient operation via a single-acting spool Rugged build and easy handlingFeaturing strong frames, robust gearboxes and rotors, the KRONE rotary tedders perform equally well in hay and heavy crops, having proven themselves best in silage. Pivot joints on the frame and scores of useful setting options make KRONE rotary tedders the masters of super clean sweeps and quality forage. Specifications Model KW 5.52 / 4 x 7 Work width to DIN 11220 mm 5,500 (18'1") Acreage Approx. ha/h(acres/hr) 5.5(13.6) Transport width mm 2,980 (9'9") Storage height mm 2,680 (8'9.5") Min. power requirement Min. kW/hp 37/50 Weight Approx. kg 680(1,499.1 lbs) No. of rotors 4 No. of tine arms per rotor 7 Tire size 16/6.50x8– Border spreading system mech.(hydr. option) Attachment category Cat II Hydraulic couplers 1 sa Angle of throw 13° - 19°

Read more less

EasyCut TS 320 Ideal for lighter tractors – with their own running gear Light-pulling and compact machine with a sturdy V-Frame All-round mowing with slewing gear Turns on the spot DuoGrip centre-of-gravity Suspension Working heit setting Comfortable via spindle Are you looking for a powerful trailed mower without conditioner that works at a width of about 3.16 m? Then the KRONE EasyCut TS 320 with DuoGrip centre-of-gravity suspension is the machine for you. This mower stands out for an extremely low power input, maximum stability as well as a superior level of specification and operator comfort. Specs EasyCut TS 320 CV Working Width - 3.16 m Drawbar Attachment - Side No. of Discs - 5 No. of Top Hats - 2 V-tines Input Power - 59/80 (kW/hp)

Read more less

ActiveMow Disc mowers Trailed disc mowers meet a wide variety of needs and requirements which vary by country, region and harvest chain. Our extensive range of mower options gives you the choice to select the specification that suits your needs. For example, choose the V-steel tine conditioner with distributing hood or the CRi roller conditioner, the swathing belt and the hydraulic swathing boards. Side-mounted mowers offering huge up/down travel Coil springs optimizing the ground pressure and adjusting without tools PTO-shaft driveline for frictional connections Robust and fully welded cutterbar without inner shoe Quick-change blades SafeCut: Individually protected discs SmartCut: Stripeless cuts thanks to optimum blade overlaps Compact in transport as the mower inclines to the middle of the tractor for optimum weight distribution and visibility KRONE ActiveMow – Rear-mounted disc mowers The KRONE ActiveMow mowers setting new benchmarks for lateral mowers. All ActiveMow models feature the same level of specification as the high-end KRONE mowers and the self-propelled high-capacity Big M, including a cutterbar with SmartCut effect, SafeCut cutterbar protection, a massive headstock and vertical storage as an option to minimize space requirement. The ActiveMow range lines up the following models: ActiveMow R 200 working at a 6' 8.6" width, ActiveMow R 240 with a 8' work width, ActiveMow R 280 with 9' 3.4" width, ActiveMow R 320 with a 10' 7.2" work width and ActiveMow R 360 working at 11' 10". Key Features and Specifications: Cutting Width: 9'3" (2,830 mm) Number of Discs: 5 Number of Top Hats: 2 Weight: 605 kg (1,333 lbs) Power Requirement: 40 / 55 kW/hp PTO Speed: 540 RPM SafeCut Hubs: Standard QuickChange Blades: Standard SmartCut Cutterbar: Increases blade overlap for a clean cut Transport Position: 100° angle position Optional Vertical Position: For storage Hydraulic Pressure Control: Option (1 da spool)

Read more less